The number of arrivals per minute at a bank located in the central

5.5 The number of arrivals per minute at a bank located in the central business district of a large city was recorded over a period of 200 minutes, with the following results:
Arrivals Frequency
0 14
1 31
2 47
3 41
4 29
5 21
6 10
7 5
8 2

a. Compute the expected number of arrivals per minute.
b. Compute the standard deviation.

5.10 If n=5 and (pie symbol) = .4, what is the probability that
a. X=4?
b. X (smaller than or equal to) 3?
c. X <2?
d. X >1?

5.15 When a customer places an order with Rudy’s OnLine Office Supplies, a computerized accounting information system (AIS) automatically checks to see if the customer has exceeded his or her credit limit. Past records indicate that the probability of customers exceeding their credit limit is 0.05. Suppose that, on a given day, 20 customers place orders. Assume that the number of customers that the AIS detects as having exceeded their credit limit is distributed as a binomial random variable.
a. What are the mean and standard deviation of the number
of customers exceeding their credit limits?
b. What is the probability that zero customers will exceed their limits?
c. What is the probability that one customer will exceed his or her limit?
d. What is the probability that two or more customers will exceed their limits?

5.19 Assume a Poisson distribution.
a. If l= 2.0, find P (X (greater than or equal to) 2)
b. If I= 8.0, find P (X (greater than or equal to) 3)
c. If I = 0.5, find P (X (smaller than or equal to) 1)

5.21 Assume that the number of network errors experienced
in a day on a local area network (LAN) is distributed
as a Poisson random variable. The mean number of network
errors experienced in a day is 2.4. What is the probability
that in any given day
a. zero network errors will occur?
b. exactly one network error will occur?
c. two or more network errors will occur?
d. fewer than three network errors will occur?

5.39 Errors in a billing process often lead to customer dissatisfaction and ultimately hurt bottom-line profits. An article in Quality Progress (L. Tatikonda, “A Less Costly Billing Process,” Quality Progress, January 2008, pp. 30–38) discussed a company where 40% of the bills prepared contained errors. If 10 bills are processed, what is the probability that
a. 0 bills will contain errors?
b. exactly 1 bill will contain an error?
c. 2 or more bills will contain errors?

6.1 Given a standardized normal distribution (with a mean of 0 and a standard deviation of 1, as in Table E.2), what is the probability that
a. Z is less than 1.57?
b. Z is greater than 1.84?
c. Z is between 1.57 and 1.84?
d. Z is less than 1.57 or greater than 1.84?

6.5 Given a normal distribution with m=100 and s= 10,  what is the probability that
a. X > 75?
b. X < 70?
c. X < 80 or X > 110?
d. Between what two X values (symmetrically distributed around the mean) are 80% of the values?

6.9 Consumers spend an average of $21 per week in cash without being aware of where it goes (data extracted from “Snapshots: A Hole in Our Pockets,” USA Today, January 18, 2010, p. 1A). Assume that the amount of cash spent without being aware of where it goes is normally distributed and that the standard deviation is $5.
a. What is the probability that a randomly selected person will spend more than $25?
b. What is the probability that a randomly selected person will spend between $10 and $20?
c. Between what two values will the middle 95% of the amounts of cash spent fall?

6.11 A statistical analysis of 1,000 long-distance telephone calls made from the headquarters of the Bricks and Clicks Computer Corporation indicates that the length of these calls is normally distributed, with m = 240 seconds and s = 40 seconds.
a. What is the probability that a call lasted less than 180 seconds?
b. What is the probability that a call lasted between 180 and 300 seconds?
c. What is the probability that a call lasted between 110 and 180 seconds?
d. 1% of all calls will last less than how many seconds?

6.13 Many manufacturing problems involve the matching of machine parts, such as shafts that fit into a valve hole.
A particular design requires a shaft with a diameter of 22.000 mm, but shafts with diameters between 21.990 mm and 22.010 mm are acceptable. Suppose that the manufacturing process yields shafts with diameters normally distributed, with a mean of 22.002 mm and a standard deviation of 0.005 mm. For this process, what is a. the proportion of shafts with a diameter between 21.99 mm and 22.00 mm?
b. the probability that a shaft is acceptable?
c. the diameter that will be exceeded by only 2% of the shafts?
d. What would be your answers in (a) through (c) if the standard deviation of the shaft diameters were 0.004 mm?

6.29 An industrial sewing machine uses ball bearings that are targeted to have a diameter of 0.75 inch. The lower and upper specification limits under which the ball bearings can operate are 0.74 inch and 0.76 inch, respectively. Past experience has indicated that the actual diameter of the ball bearings is approximately normally distributed, with a mean of 0.753 inch and a standard deviation of 0.004 inch. What is the probability that a ball bearing is

a. between the target and the actual mean?
b. between the lower specification limit and the target?
c. above the upper specification limit?
d. below the lower specification limit?
e. Of all the ball bearings, 93% of the diameters are greater than what value?







Calculate Your Essay Price
(550 words)

Approximate price: $22

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read more

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read more

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read more

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more

Order your essay today and save 10% with the coupon code: best10